What are you looking for?

Create a Working Group

RDA Working Groups (WGs) aim to accelerate progress in specific communities, increasing data-driven innovation. Efforts are intended to promote data sharing and exchange, interoperability, data use and re-use, data discoverability and analysis, data stewardship and preservation, and best practices.

Creating a Working Group (WG)

To initiate the formation of an RDA WG, interested parties should complete an RDA Group Initiation Request Form. Please note that only one initiation request form per group is accepted. Follow these steps to create a WG:

  1. Statements of Work: Each WG needs to develop a Statement of Work (SoW) outlining beneficiaries, goals, outcomes, and operational approach. The WG chair(s) are responsible for creating the Statement of Work, which is then added to the group via the RDA Group creation form – The Secretariat is happy to help with this step, please email [email protected] if you would like assistance.
  2. RDA Group Creation Form: Please proceed to the group creation form, ensuring to include the Statement of Work once completed.
  3. RDA Group Review: Once the group creation form is submitted, the Secretariat will publish the Statement of Work on the RDA Community Page and informs the Technical Advisory Board (Tab), Council, and the broader community of its availability for review. For further details about the review criteria, please refer to the Statements of Work page.
    1. Community review: The community has a minimum of 4-weeks to provide feedback. In case of substantial comments, the WG should update the SoW accordingly. 
    2. TAB review: In parallel to the Community review, the TAB reviews the SoW over 4-6 weeks, reaching one of three conclusions:
      1. Acceptance: the SoW is accepted and will be forwarded on to Council for final review.
      2. Requiring revisions: TAB will notify the group chairs of the required changes. Once made, TAB will review and approve the revised SoW and forwarded on to Council for final review.
      3. Rejection: TAB will provide reasons for the decision to the group chairs.
    3. Council review: Upon acceptance by TAB, the SoW undergoes a 2-week review by the Council, which can result in four possible decisions:
      1. Recognized and endorsed: Group is recognized as RDA WG and should commence its work.
      2. Recognized and endorsed subject to specific revisions: Worthwhile idea, changes need to be made to strengthen the SoW and meet approval criteria. After the approach has been modified, the group will be recognized by RDA and commence its work.
      3. Encouraged but not presently endorsed: Good idea but needs refinement. The group needs to mature its concept and refine its SoW for approval. Council and/or TAB will provide specific feedback and clarification on what is needed.
      4. Not endorsed: The idea is not a good fit for the RDA or does not meet other criteria for approval. Council will provide specific feedback and clarification. Council may feel that the group may be more appropriate as discussion-oriented Interest Groups, from which specific outcome-oriented Working Group ideas and SoW submissions may arise later
    4. WG Endorsement: If Council perceives reasonable community consistence and clear needs, deliverables, and beneficiaries, they formally recognize the group.
People illustrations by Storyset
Figure 1: WG Case Statement Review Process – from Case Statement Development to Endorsement.1

Joining a Working Group (WG)

Any RDA member can join a WG by selecting “Join group” on the group’s page. You can find a list of the current RDA WGs here. If you are not yet an RDA member, you can sign up by clicking on this link.

Working Group (WG) Outputs

Working Groups are expected to deliver their Recommendations within 12-18 months, along with other potential outputs. For more details on WG Outputs, please visit the Working Group Outputs page.

The outputs of recognized WGs, especially their Recommendations, are strongly promoted by Council, the OAB, the TAB, the Secretariat, and the RDA Membership at large. We work hard to encourage research agencies, industry, and academia to adopt the products of RDA Working Groups.

Closing out a Working Group (WG)

After delivering its Recommendation and incorporating any changes from the community review phase, the WG must choose one of the following options:

  1. Disbandment: The WG finishes and disbands and moves to “Historical Groups“. Before disbanding, the group ensures its Recommendation(s) will be managed as specified in its maintenance plan, which may involve transferring responsibility to another organisation or group.
  2. Transition to Maintenance Group: There is no formal review for this transition; the group notifies the RDA Secretariat and provides details on:
    • the rationale
    • expected duration
    • co-chairs
    • ongoing adoption activities
    • maintenance plans (publications, facilities, updates and new versions, pilots and demonstrators).
  3. The maintenance phase focuses on:
    • managing community maintenance activities
    • supporting adopters of the Recommendation
    • disseminating, making minor revisions to, and updating adopter details and stories of endorsed Recommendations and Outputs produced before the transition
    • transferring work to other groups as needed.
  • Once in maintenance phase, the following policy applies:
    • TAB and the Organisational Assembly may comment and give feedback on the maintenance phase request from the Working Group.
    • Priority for plenary sessions is given to active IGs and WGs. WGs in maintenance phase may submit for plenary sessions but they are not expected to run sessions, since new areas of work should be covered in new groups.
    • WGs that enter the maintenance phase will be invited by the Secretariat to provide a short summary of the activities in the past 18 months and plans for the upcoming 18 months. If the Co-chairs are unresponsive Secretariat will recommend that the group should be closed and the group will be moved to historical status.
    • Based on the 18-month review, Secretariat will make one of the following recommendations to TAB:
      • Continuation of the maintenance phase for a further 18 months or a specific period to be justified;
      • Closure of the maintenance phase as a result of:
        • completion of maintenance work and a request to become historical.
        • failure to adhere to the maintenance phase policy, e.g. new outputs generated, new scope of development foreseen or started, etc.
        • inactivity or no updates as described above.
  1. Closing a WG: An RDA Working Group is closed and moved to Historical when it has completed its expected outputs and doesn’t plan further activity within the RDA, or when it becomes unresponsive to the TAB Liaison’s and Secretariat’s requests for over 6 months.
    • Procedure: The TAB Liaison or Secretariat will make three attempts at least one month apart to contact all WG/IG chairs during this period. Full details are on the Closing RDA Groups page.
  2. Start a New WG: The WG can create a new WG for producing a new version or significant update of the Recommendation/s or addressing additional work. This involves a lightweight review process including Community review and invited input from the  Organisational Assembly, followed by decisions from TAB and Council.
  3. Start a New Interest Group (IG): The WG can create a new IG to facilitate communication and coordination on its topic. This also involves a similarly lightweight review process. See the IG description page for details.

Withdrawing a Working Group

If you, as co-chair of a WG, and your fellow co-chairs want to withdraw the WG prior to delivering the WG’s Final Recommendation, please email the RDA Secretariat at [email protected] and state the reasons for wanting the group to be closed.  The Secretariat will then contact you about the next steps.

Additional information

For more information, please refer to:

RDA Working and Interest Group Chairs: Roles and Responsibilities

Statement of Work Development and Review Process

Working Group Outputs